Build concrete structures faster, safer, and more economically
Simple and Reliable
Install this concrete sensor directly onto the rebar. Temperature and strength readings are immediately sent to your smartphone.
The Highest Standards
Eliminate reliance on error-prone field-cured cylinder break tests. SmartRock tests strength based on ASTM C1074 and is approved by DOTs.
Finish Projects Faster
Make critical, real-time decisions during concrete curing. Help crews hit project milestones faster, saving weeks off construction schedules.
Install SmartRock in three easy steps
1
Tag
Connect the concrete strength sensors to the app, allowing for easy access to your strength data by project section.
2
Install & Pour
Secure the SmartRock concrete strength sensor to the rebar in the formwork and pour concrete as usual.
3
Results
Open the SmartRock app to immediately view concrete temperature and strength readings.
The industry's top choice for concrete strength monitoring
Live Overview
Mix Calibrations
Project Management
Data History
Live Overview
Mix Calibrations
Project Management
Data History
Reading Range |
-22 to +181 °F (-30 to 85 °C) |
Accuracy | ±1.8 °F (1 °C) |
Measurement Resolution | ± 0.18 °F (± 0.1°C) |
Measurement Frequency | Once every 15 mins (for 2 months of data) |
Wireless Signal Range | Up to 40 feet* Up to 12 meters* |
Dimensions | L: 3 1/8″ (80 mm) W: 1 5/8″ ( 42 mm) H: 1 1/32″ (26 mm) |
Temperature Cable Length | 12 inches (30 cm)/ 10 feet (3 m)/ by request: 50 feet (15.2 m) |
Battery Life | Up to 4 months after installation |
Data Communication and Analysis | Android and iOS mobile app Giatec 360 Cloud Dashboard |
Standards | ASTM C1074 (Approved by ACI 318, CSAA23.1, most of USDOT specifications) |